Home > News > Content
Plywood Exports Face Three Pressures
Aug 02, 2017

Plywood exports face three pressures
 In recent years, China's Plywood industry has developed rapidly, export volume growth, but exports still face enormous pressure, this pressure comes from three aspects, namely the domestic industry competition, Plywood manufacturers and international market development.
    In the domestic competition, the enterprise disorderly competition, the market image is damaged. China's Plywood industry starting point is low, many enterprises to small and medium-sized private enterprises, product homogeneity serious. Long-term use of "small profits but quick turnover" of the sales strategy, the product will continue to follow the original characteristics, no new product exports; Plywood manufacturers, the face of international Plywood on China's anti-dumping duties, many manufacturers do not want to pay high Responding to costs and excessive energy, and even have to sit back and enjoy the psychological, to induce more anti-dumping prosecution and the formation of a chain reaction; the third is the lack of target market diversification. China's export Plywood to the EU, the United States, South Korea, the Middle East as the main target market, exports are relatively concentrated, increasing the risk of export markets.
 Plywood is coated with veneer in the direction of grain criss-cross staggered slab, heated or not heated under the conditions of suppression, the product features are as follows:
    1. Plywood has all the advantages of natural wood, such as light weight, high strength, beautiful texture, insulation, etc., but also make up for natural wood naturally some defects such as knots, small format, deformation, vertical and horizontal mechanical differences and other shortcomings The
    2. Plywood production can be a reasonable use of logs. Because it is no sawdust, every 2.2-2.5 cubic meters of logs can produce 1 cubic meter of Plywood, instead of about 5 cubic meters of logs saw the use of plate, and the production of 1 cubic meter of Plywood products, but also produce residues 1.2-1.5 cubic Rice, which is the production of medium density fiberboard and particleboard better raw materials.
    Because the Plywood has the advantages of light weight, high strength and convenient construction, no warping, good tensile strength and other advantages, so the product is mainly used in furniture manufacturing, interior decoration, residential building with a variety of plates, followed by shipbuilding, Manufacturing, all kinds of military, light industrial products and packaging and other industrial sectors.
 Ordinary Plywood adjacent to the veneer of its grain is "vertical", the number of layers is odd, we pick it, we should pay attention to some places to pick to the satisfaction of the Plywood.
    1. Appearance: select the table smooth and smooth grain clear, the glue layer can not have a bubble, layered phenomenon. Avoid the selection of the panel splice from the seam, stack and core stack. More than 6 mm Plywood to determine whether the war is excessive, special plate warpage can not exceed 0.5%, one or two plates can not exceed 1%, third board can not exceed 2%.
    2. Size: Do not buy the thickness of the size of the short two serious Plywood.
    3. Formaldehyde release: the state prohibits the sale of formaldehyde emission greater than 5.0mg / L of the board for interior decoration, this point to understand clearly.
    4. Gluing strength: available knife along the glue layer to pry open the Plywood, observe the residual layer of wood on the traces of wood. Such as peeling off the surface of the more wood, indicating that the quality of Plywood is better, such as Plywood veneer along the adhesive layer peeling, stalemate to see the residual wood to prove that the strength of the wood has not yet fully play and the glue layer has been destroyed So the glue strength is poor.